Portable Heaters & Temporary Heating Solutions in Ontario

Cantherm supplies commercial-grade portable heating equipment for construction, industrial, commercial and temporary applications throughout Ontario. Available solutions include indirect-fired diesel heaters, electric heaters and radiant heating, along with ducting, thermostats, fuel-system accessories and controls.

For projects that also require temporary power or cooling, Cantherm supplies portable diesel generators and commercial portable air-conditioning equipment, allowing multiple temporary equipment requirements to be sourced through one supplier.

CLIMATE

Portable heaters and mobile coolers for commercial and industrial use.

POWER

Diesel generators for temporary and remote power. Fuel storage and aircraft ground power.

SHELTER

Portable buildings, aircraft covers and personal protective equipment.

Temporary Heat for Construction & Industrial Projects

Temporary heating requirements depend on the size and construction of the space, the temperature that needs to be maintained and how the building is being used. A large construction project may require high-output heat distributed through ducting, while a workshop or finished commercial area may be better suited to electric or targeted radiant heating.

Cantherm supplies Arcotherm portable heating equipment for a wide range of commercial and industrial applications. Indirect-fired heaters provide clean ducted heat for larger spaces, electric heaters suit applications where adequate electrical service is available and radiant heaters provide concentrated heat where the entire building does not need to be warmed.

Cantherm diesel portable heater - Cantherm Distributors

Clean, Ducted Heat for Enclosed Workspaces

Indirect-fired heating is well suited to construction sites, warehouses, workshops and other enclosed spaces where clean heated air needs to be delivered into the building. Combustion exhaust remains separate from the heated airflow while warm air can be distributed through flexible ducting.

Cantherm supplies Arcotherm EC, PHOEN, JUMBO and TITAN indirect-fired heaters across a wide range of commercial heating capacities. Compatible duct adapters, thermostats, return-air configurations and external fuel systems allow the equipment to be configured around the layout and operating requirements of the project.

Diesel Heat for Larger Spaces

Large buildings and cold-weather projects can require more temporary heat than the available electrical service can practically provide. Diesel-fired equipment provides high heating capacity for construction sites, warehouses, temporary buildings and industrial facilities without requiring a large electrical supply.

Heater capacity should be based on the volume of the space, outdoor conditions, required indoor temperature, insulation and air leakage. Cantherm can help size the heating requirement and match it to an appropriate Arcotherm system.

For longer-duration projects, diesel heaters can also be configured with larger external fuel supplies, thermostatic control and ducting to distribute heat throughout the building.

Electric Heat for Enclosed Spaces

Commercial electric heaters are useful where sufficient electrical service is already available and fuel storage or combustion equipment is not desirable. Common applications include finishing work, workshops, commercial spaces, temporary buildings and supplemental indoor heating.

Cantherm supplies Arcotherm EK Series electric heaters in several capacities, including larger models that can be connected to ducting. Voltage and available electrical capacity should be confirmed along with the heating requirement before selecting the equipment.

Radiant Heat for Specific Work Areas

Radiant heating is useful where only part of a building or workspace needs additional heat. Instead of heating a large volume of surrounding air, radiant equipment directs heat toward a defined work area, people or equipment.

Cantherm supplies Arcotherm FIRE Series radiant heaters for workshops, maintenance areas, construction projects and other commercial applications where concentrated heat is more practical than heating the entire space.

Ducting, Thermostats & Fuel Supply

Temporary heating systems may require more than the heater itself. Flexible ducting can distribute warm air through large or divided spaces, thermostats can maintain a consistent working temperature and external fuel connections can support longer operating periods.

Cantherm supplies ducting, adapters, thermostats, return-air components and fuel-system accessories for compatible Arcotherm heaters. These components can be selected together with the heating equipment so the system is configured for the project from the start.

Heating for Commercial & Industrial Applications

Cantherm portable heating equipment is used across construction, manufacturing, warehousing, maintenance, agriculture, aviation, equipment rental and other commercial applications.

Construction projects may require temporary heat before permanent HVAC is operating, while industrial facilities may need supplemental heat during maintenance, shutdowns or seasonal work. Warehouses and workshops may need additional heat in specific areas without changing the permanent building system.

The equipment type, heating capacity and air-distribution requirements can be matched to the space and application.

Yanmar YDG Series Portable Diesel Generator - Cantherm Distributors

Temporary Power

Cantherm supplies portable diesel generators for construction, field service, industrial and temporary-power applications throughout Ontario.

Yanmar YDG portable diesel generators are suited to jobsites and applications where a compact diesel power source is required. Generator capacity should be based on voltage, running load and the higher starting requirements of motors, compressors, pumps and other equipment.

Cantherm can help review the electrical load before selecting a generator, particularly where several pieces of equipment need to operate at the same time.

Buy Portacool™ Portable Evaporative Coolers

Portable Cooling

Cantherm supplies commercial portable cooling equipment for workshops, manufacturing facilities, equipment rooms, warehouses, offices and temporary spaces throughout Ontario.

For enclosed spaces requiring controlled temperature reduction, portable refrigerated air conditioning is generally the appropriate solution. Cantherm carries commercial portable AC from MovinCool and OceanAire for applications ranging from spot cooling to larger commercial requirements.

Evaporative cooling is also available for suitable open or well-ventilated environments where high airflow is required. The cooling method should be matched to the space, ventilation and temperature-control requirement.

Ventilation Equipment

Cantherm supplies commercial portable cooling equipment for workshops, manufacturing facilities, equipment rooms, warehouses, offices and temporary spaces throughout Ontario.

For enclosed spaces requiring controlled temperature reduction, portable refrigerated air conditioning is generally the appropriate solution. Cantherm carries commercial portable AC from MovinCool and OceanAire for applications ranging from spot cooling to larger commercial requirements.

Evaporative cooling is also available for suitable open or well-ventilated environments where high airflow is required. The cooling method should be matched to the space, ventilation and temperature-control requirement.

Serving Customers Throughout Ontario

Cantherm supplies commercial heating, power and climate-control equipment throughout Ontario, including Toronto, Ottawa, Mississauga, Brampton, Hamilton, London, Kitchener, Waterloo, Oshawa, Barrie, Sudbury, North Bay, Timmins, Sault Ste. Marie, Thunder Bay, Kingston, Windsor and surrounding communities.

Equipment is supplied from Cantherm’s Winnipeg location to commercial and industrial customers across Canada. Contact Cantherm with the project location, equipment requirements and operating conditions to confirm availability and sizing.

Serving Ontario

Ontario Portable Heater FAQs

Does Cantherm supply portable heaters in Ontario?

Yes. Cantherm supplies indirect-fired diesel heaters, electric heaters and radiant heating equipment for commercial, industrial and construction applications throughout Ontario.

What type of heater is best for an enclosed construction site?

Indirect-fired heaters are commonly used where clean heated air needs to be delivered into an enclosed or occupied workspace. Combustion exhaust remains outside while warm air can be ducted into the building.

Does Cantherm supply portable diesel heaters in Canada?

Yes. Cantherm supplies commercial diesel-fired portable heating equipment for projects across Canada, including Ontario. Available equipment includes several Arcotherm indirect-fired and radiant heater ranges.

Can Cantherm help size a temporary heating system?

Yes. Heater sizing depends on the dimensions of the space, required temperature increase, building construction, insulation and air leakage. Cantherm’s BTU Calculator provides an initial estimate and larger applications can be reviewed directly.

Does Cantherm supply diesel generators in Ontario?

Yes. Cantherm supplies Yanmar YDG portable diesel generators for commercial, construction and industrial applications. Generator sizing should take running load, starting requirements and voltage into account.

Does Cantherm supply portable air conditioning in Ontario?

Yes. Cantherm supplies commercial portable air conditioning from MovinCool and OceanAire along with evaporative cooling equipment for suitable industrial and commercial environments.

Does Cantherm supply ventilation equipment?

Yes. Cantherm carries portable commercial ventilation equipment for temporary airflow and ventilation applications. Equipment should be selected according to the required airflow and workspace conditions.

we keep it working.

parts. service. support.