Titan oil pan heater pad

Cold-Start Protection to -35°F

Titan Oil Pan Heater Pads

Titan oil pan heater pads are industrial-grade silicone heaters less than 2 mm thick, for diesel engines, hydraulic reservoirs, fuel filters, and batteries. The 3M VHB backing peels and sticks directly onto the surface. Plug the pad into a standard outlet and it brings the fluid to roughly 100°F (38°C) in under two hours.

Cantherm Distributors is an authorized Titan distributor, supplying and supporting the full Titan line across Canada and the USA.

Oil Pan Heater Sizing Chart

ModelSize (in)WattsAmpsVoltsGasDieselHyd. Tank
120 / 240V AC
TH50*1.25 × 3.5500.41201–31–22–4
TH125R*3 round1251.1/0.5120/2402–52–44–40
TH125L*1.5 × 61251.1/0.5120/2402–52–44–40
TH2504 × 52502.2/1.1120/2405–125–1440–120
TH5005 × 75004.2/2.1120/240—14–25120–200
TH10006 × 1210008.4/4.2120/240—25–50200–400
12V DC
TH50-123 × 3504.0121–31–21–4
125-124 × 412510.0122–52–44–40
250-125 × 525020.0125–125–1440–120

* Also suitable for transmissions up to 16 US qt / litres. Capacities are a sizing guide, so confirm fit with our team. For reliable starts every time, pair your oil pan heater with a THB60 Battery Warmer.

Titan fuel filter heater

Fuel Filter Heaters

Gelled fuel starves the injectors. Titan fuel filter heaters use an adjustable Velcro band that fits a wide range of filter diameters. They stop gelling, and move to the replacement filter at every service.

  • 3 models in 12V DC and 24V DC
  • 50 W and 100 W options
  • Fits filter diameters from 3.75″ to 5″
Titan battery warmer

Battery Warmers

A fully charged battery in good condition still delivers only 40% of its cranking power at 0°F (-18°C). Titan battery warmers are thin enough for most battery boxes and hold capacity so the pack delivers real cranking amps on the coldest mornings.

  • 60 W warmers in 120V AC and 240V AC
  • 5.5″ × 8.25″
  • Starter kits pair an oil pan heater with a battery warmer
Titan Heater-Stat thermostat plug adapter

Heater-Stat Thermostat

The Heater-Stat is a plug adapter that switches your heaters on below 35°F and off above 45°F. Plug your pad into a standard shop outlet, add the Heater-Stat adapter, and it cycles the heater automatically.

  • UL & CE certified component
  • Automatic on/off: on below 35°F, off above 45°F
  • Compatible across oil pan heaters, battery warmers & block heaters
  • Reduces electrical costs
  • No special installation required
  • Maximum rating: 1800 watts, 15 amps
  • Use with a GFCI outlet

Have Questions?

Get In Touch with Cantherm Distributors

Your solution starts here, learn more about our products, or get a quote today.