Portable Heating & Diesel Power for North Dakota Worksites

Cantherm supplies portable heating and diesel power equipment for construction, agriculture, energy, maintenance and industrial applications throughout North Dakota.

North Dakota projects often have to operate through large seasonal temperature swings and in locations where permanent utilities may be limited. Cantherm supplies commercial heating systems, portable and mobile diesel generators, fuel-system accessories and portable cooling equipment that can be configured around the actual conditions of the job.

CLIMATE

Portable heaters and mobile coolers for commercial and industrial use.

POWER

Diesel generators for temporary and remote power. Fuel storage and aircraft ground power.

SHELTER

Portable buildings, aircraft covers and personal protective equipment.

ec series diesel heater

In-Direct Heating

Portable indirect-fired heaters offering nominal heating outputs of 100,000 to 1,000,000 BTU’s.

ek series electric heater for construction

Electric Portable Space Heater

Available in four different sizes with ranges of heating power from 5,000 to 60,000 BTU’s.

Radiant Infrared Mobile Space Heater

Great units for very large spaces, such as warehouses, industrial sheds, yards, open spaces.

Keep Winter Work Moving

Temporary heat in North Dakota is often about maintaining usable working conditions in spaces that were never designed to be occupied through winter. Construction sites, equipment shops, agricultural buildings, maintenance areas and temporary structures may need substantial heat long before a permanent HVAC system is available.

For large enclosed spaces, Cantherm supplies Arcotherm indirect-fired heaters that can deliver clean heated air through flexible ducting. Smaller work areas may be better suited to electric heat, while radiant equipment can provide concentrated heat where warming an entire building is unnecessary.

The amount of heat required depends on building volume, outside temperature, insulation, air leakage and the indoor temperature the project needs to maintain.

Heat Large Buildings Without Relying on Electrical Capacity

Large shops, partially completed buildings and industrial workspaces can require far more heat than the available electrical service can reasonably provide.

Diesel-fired equipment provides high heating capacity while using electricity primarily for fans, controls and associated components. Cantherm’s Arcotherm range includes equipment for smaller commercial applications through large temporary heating systems capable of distributing warm air into several work areas.

Where a building is divided or the heater needs to remain outside, ducting and multiple air outlets can be used to move heat where it is actually needed rather than trying to warm the entire structure from one point.

Plan for Runtime, Fuel & Air Distribution

On longer-duration winter projects, heater output is only part of the system.

Fuel capacity affects how long equipment can operate between service intervals. Duct length and layout affect how heat reaches the workspace. Thermostatic control can reduce unnecessary operation once the required temperature has been reached, while return-air configurations can improve the way heated air moves through suitable spaces.

Cantherm supplies compatible ducting, adapters, thermostats and external fuel-system components for Arcotherm equipment. These components are particularly important on larger projects where a portable heater needs to function as a complete temporary heating system rather than as a standalone unit.

Heater Ducting, Thermostats & Accessories

The heater itself is only part of an effective temporary heating system. Cantherm supplies accessories for Arcotherm portable heaters including duct adapters, flexible ducting, thermostats and external fuel tank options. Properly selected accessories can help distribute heat where it is needed, control operating temperatures and make the heating system easier to manage on an active jobsite.

Temporary Power for Field & Remote Operations

North Dakota’s agriculture and energy sectors create many applications where electrical power is required away from permanent infrastructure. The state identifies energy as its largest industry and agriculture as an important part of its economy.

Cantherm supplies diesel generators for construction sites, field maintenance, pumps, tools, temporary facilities and other commercial applications where dependable portable power is required.

Yanmar YDG units provide compact portable diesel power for smaller loads. Larger mobile generator systems are available for jobs requiring substantially greater electrical capacity.

Enermax - TecnoGen USA Mobile Diesel Generators

Tecno-Gen Mobile Diesel Generators

Unmatched Power – Rugged, Reliable Generators.

yanmar diesel generator

Match the Generator to the Work

Generator selection should be based on the complete load rather than the largest individual piece of equipment.

Tools, lighting and resistive loads are relatively straightforward, while pumps, compressors and electric motors can require substantially more power during startup. Where a generator will also support portable heating equipment, pumps or other field systems, those loads need to be considered together.

For remote applications, expected runtime and access to fuel may also matter as much as generator capacity.

Equipment for Agriculture, Energy & Construction

North Dakota’s mix of agriculture, energy, manufacturing and construction creates applications where portable heating and power can solve very practical problems. The state specifically identifies value-added agriculture, energy and manufacturing among its priority industries.

Agricultural operations may need heat and power in equipment shops, maintenance areas or temporary workspaces. Energy and field-service operations may require equipment far from established utilities. Construction projects can require both temporary heat and electrical power before permanent building systems are operational.

Cantherm equipment can be selected according to the space, load and operating conditions rather than simply the type of industry.

Summer Cooling Where the Work Gets Hot

Heating is the dominant climate-control requirement for this page, but North Dakota can still experience significant summer heat, including temperatures of 100°F or higher in some parts of the state.

Cantherm supplies refrigerated portable air conditioning for enclosed equipment rooms, shops and temporary commercial spaces. Evaporative cooling is also available for appropriate open or well-ventilated work areas, particularly where high airflow and worker cooling are more important than maintaining an exact indoor temperature.

Vector Evaporative Coolers

Built for patios to production floors and everything in between.

Portacool Evaporative Coolers

Sync your cooler to your phone and cool anywhere.

movincool construction portable air conditioner

MovinCool Air Conditioner

Portable air conditioners deliver targeted spot cooling,

OceanAire Air Conditioner

Air Conditioners built specifically for commercial and industrial use.

we keep it working.

parts. service. support.

North Dakota

North Dakota FAQs

Does Cantherm supply portable heaters in North Dakota?

Yes. Cantherm supplies commercial portable heating equipment for construction, agricultural, industrial and field applications throughout North Dakota.

What type of heater works for a large shop or construction building?

Indirect-fired heaters are commonly used where substantial amounts of clean heated air need to be distributed through a large enclosed space. Ducting can move that heat into one or several areas.

Can a portable heater run from an external fuel tank?

Compatible Arcotherm systems can be configured with external fuel connections for applications requiring longer operating periods.

Does Cantherm supply diesel generators in North Dakota?

Yes. Cantherm supplies portable Yanmar YDG diesel generators along with larger mobile generator systems for commercial and industrial applications.

What should I provide for generator sizing?

Provide the voltage and load information for everything that needs to operate at the same time, including motors, compressors, pumps and equipment with higher startup requirements.

Can Cantherm help size heating for very cold conditions?

Yes. Space volume, required temperature rise, insulation and air leakage can be used to estimate the heating load with Cantherm’s BTU Calculator or through direct project review.

Serving Customers Throughout North Dakota

Cantherm supplies commercial heating, power and portable cooling equipment throughout North Dakota, including Fargo, Bismarck, Grand Forks, Minot, West Fargo, Williston, Dickinson, Mandan, Jamestown and surrounding communities. Cantherm’s existing page already identifies these markets.

Contact Cantherm with the project location, space dimensions, temperature requirement, electrical load and available utilities to determine suitable equipment.