South Carolina’s hot, humid summers make refrigerated portable air conditioning an important option for enclosed workplaces, temporary buildings, equipment rooms and commercial spaces.
Portable heaters and mobile coolers for commercial and industrial use.
Diesel generators for temporary and remote power. Fuel storage and aircraft ground power.
Portable buildings, aircraft covers and personal protective equipment.
A heater that works well in an open workshop may not be appropriate for an enclosed construction space.
Cantherm supplies several different heating technologies so the equipment can be matched to the application rather than selecting a heater based on BTU output alone.
Before selecting temporary heat, consider:
Indirect-fired heaters are one of the most versatile choices for commercial construction and industrial temporary heating.
The combustion process is separated from the heated air. Clean heated air can then be delivered into the workspace while combustion exhaust is directed outside.
This makes indirect-fired heating particularly useful for enclosed or occupied construction areas, warehouses, temporary structures, workshops and other applications requiring clean heated air.
Cantherm’s Arcotherm indirect-fired range includes the EC, PHOEN, JUMBO and TITAN Series, covering applications from smaller temporary work areas to large commercial and industrial spaces. Cantherm’s EC Series, for example, includes models from approximately 112,000 to 294,000 BTU and supports ducting, thermostats and external fuel systems
Not every application requires heating an entire building.
Radiant heaters direct heat toward a specific work area, person or piece of equipment rather than relying primarily on heating the surrounding air.
They can be useful for workshops, open work areas, maintenance operations and applications where concentrated heat is more practical than trying to raise the temperature of a large space.
Cantherm supplies Arcotherm FIRE Series radiant heaters for commercial and industrial applications.
Where sufficient electrical service is available, electric heating eliminates the need for on-site fuel storage and produces no combustion exhaust at the heater.
Electric portable heaters can be useful for enclosed spaces, finishing work, workshops and applications where fuel-fired equipment is not appropriate.
Cantherm carries Arcotherm EK Series and Walter Allegro electric heating equipment.
Temporary heat is not simply about keeping a jobsite comfortable. The right heating system helps maintain working temperatures, supports temperature-sensitive construction processes and provides dependable heat where permanent HVAC is unavailable or incomplete.
Cantherm supplies Arcotherm portable heaters for construction sites, industrial facilities, warehouses, temporary structures, workshops and commercial applications throughout North Carolina.
Available options include indirect-fired, radiant and electric portable heaters, allowing the heating system to be selected according to the space, required heat output, ventilation and available fuel or electrical service.
Whether the project is in Fayetteville, Winston-Salem, Raleigh, Durham or elsewhere in North Carolina, Cantherm can help determine the heater type and output required for the application.
Portable heating applications can include:
Cantherm works with customers across a wide range of industries including construction, aviation, agriculture, manufacturing, mining, rentals, utilities, warehousing and mechanical servicing.
Cantherm supplies portable heating equipment throughout North Carolina, including areas where customers are already actively searching for temporary heat.
Temporary heating equipment for construction sites, commercial buildings, workshops and industrial applications in Fayetteville and surrounding areas.
Portable industrial and construction heating options for temporary workspaces, warehouses and commercial projects throughout the Winston-Salem area.
Temporary heating solutions for construction, commercial and industrial applications throughout Raleigh, Cary and the surrounding Triangle area.
Indirect-fired, radiant and electric portable heating equipment for Durham construction and industrial applications.
Commercial and temporary heating equipment for construction, industrial and warehouse applications throughout Greensboro and the surrounding area.
Portable indirect-fired heaters offering nominal heating outputs of 100,000 to 1,000,000 BTU’s.
Available in four different sizes with ranges of heating power from 5,000 to 60,000 BTU’s.
Great units for very large spaces, such as warehouses, industrial sheds, yards, open spaces.
Cantherm supplies heater accessories including: Flexible ducting, Duct adapters, Thermostats, External fuel tank options, Return-air adapters. Ducting can distribute heated air to specific areas while thermostatic controls help maintain the required working temperature without continuously operating the heater at full output. Cantherm’s Arcotherm systems support a variety of ducting and control configurations depending on the model.
Cantherm supplies MovinCool and OceanAire portable AC for spot cooling, supplemental cooling and temporary temperature control. These systems are suited to applications where the permanent HVAC system cannot keep up with the heat load or where cooling is required only in a particular room or work area.
For open warehouses, loading areas, workshops and other well-ventilated environments, high-volume evaporative cooling can also provide useful worker cooling and air movement. Because evaporative performance decreases as humidity rises, the space and operating conditions should be reviewed before selecting that type of equipment.
Cantherm also supplies portable cooling equipment for commercial and industrial applications.
Cooling technology should be selected according to the environment. Evaporative cooling and refrigerated portable air conditioning solve different problems and should not be treated as interchangeable equipment.
For open or highly ventilated work areas, evaporative cooling may be appropriate depending on conditions. Enclosed spaces requiring controlled temperature reduction will generally require refrigerated portable air conditioning.
Built for patios to production floors and everything in between.
Portable air conditioners deliver targeted spot cooling,
Air Conditioners built specifically for commercial and industrial use.
Cantherm also supplies portable and mobile diesel power equipment for construction, industrial and remote applications.
Cantherm’s current equipment offering includes portable Yanmar diesel generators as well as larger mobile diesel generator options.
Unmatched Power – Rugged, Reliable Generators.
Portable generators can provide temporary power where permanent service is unavailable, support remote equipment or provide power for temporary construction operations.
Does Cantherm supply temporary heaters in North Carolina?
Yes. Cantherm supplies commercial and industrial portable heaters for construction, industrial and other professional applications throughout North Carolina.
What is the best heater for an enclosed construction site?
Indirect-fired heaters are commonly used where clean heated air needs to be delivered into an enclosed or occupied work area. Combustion exhaust remains separate from the heated air and can be directed outside.
How many BTUs do I need for a construction site?
The required heating capacity depends on the volume of the space, outside temperature, desired inside temperature, insulation and air leakage. Cantherm’s BTU Calculator can provide an initial estimate.
Can temporary heat be ducted into a building?
Yes. Many Arcotherm indirect-fired heaters support flexible ducting and different adapter configurations so heated air can be directed into specific areas.
Does Cantherm supply temporary heaters in Fayetteville and Raleigh?
Yes. Cantherm supplies equipment throughout North Carolina, including Fayetteville, Raleigh, Winston-Salem, Durham, Cary, Greensboro and surrounding areas.
Does Cantherm also supply diesel generators?
Yes. Cantherm carries portable and mobile diesel generator equipment for construction, industrial and temporary power applications.
Cantherm supplies equipment to customers throughout North Carolina including: Charlotte, Raleigh, Greensboro, Durham, Winston-Salem, Fayetteville, Cary, Wilmington, High Point, Concord, Hickory, Asheville, Chapel Hill.
