Biemmedue Arcotherm TITAN Series Heater - Indirect Combustion Mobile Space Heaters
Diesel
Kerosene
Jet-Fuel-F-18@4x
LPG
Natural-Gas
Logo - Biemmedue Arcotherm

Biemmedue Arcotherm TITAN Series Heater

Indirect-Fired Mobile Space Heater with Centrifugal Fan

  • CSA Approved
  • Dual Heat Exchanger – higher efficiency
  • Burner Cover – protects burner from contaminants
  • Bearing Structure – with removable panels and better anchorage for movement on any floor
  • Reinforced Panels – superior rigidity and strength
  • High Performance Fan – increased air flow and static pressure
  • Manual Gas Valve – easily switch between NG and LPG
  • Remote Thermostat – optional accessory
  • Low Noise Fan – ≤ 69 dB at 6 ft

The Arcotherm TITAN Series is a duo of portable indirect-fired heaters offering nominal heating outputs of 750,000 and 1,000,000 BTU’s. Both versions can be outfitted with either a gas (natural gas/propane) or an oil (diesel/kerosene/jet fuel) burner. Indirect-fired heaters produce heat by creating a flame in an enclosed combustion chamber. The exhaust created in the combustion process then makes its way through a five-pass heat exchanger and finally expelled through a chimney located at the top of the heater. A custom exhaust vent can be attached to fit any application in order to safely expel the exhaust fumes when used in indoor applications. A powerful centrifugal fan located at the back of the heater forces ambient room or atmospheric air through the unit, over and around the hot combustion chamber, and expels the freshly heated air out of the front of the unit. This expelled hot air can either blow freely or be ducted in one, two, or four directions to specific areas. The centrifugal fan provides a balanced compromise between efficiency (96%), low noise, and high static pressure (300Pa, a feature particularly useful when long lengths of ducting are required). The TITAN Series heaters come with a rugged bearing structure containing various lifting points, handles and supports making them ideal for use in tougher applications, such as agriculture, heavy construction, mining, oil & gas, rentals and large outdoor structures.

Arcotherm TITAN Series Heater Specifications:

TITAN 1000 Oil

Weight: 

BTU (input):

Efficiency:

CFM:

Tank Capacity:

Fuel Use:

Run Time:

Power:

1,180 lbs

1,000,000

95.8%

11,183

N/A

7.16 gal/h

N/A

240 V / 1 ph / 60 Hz

TITAN 1000 Gas

Weight: 

BTU (input):

Efficiency:

CFM:

Tank Capacity:

Fuel Use:

Run Time:

Power:

1,180 lbs

1,000,000

91.7%

11,183

N/A

“972 cfh NG / 399 cfh LPG”

N/A

240 V / 1 ph / 60 Hz

TITAN 750 Oil

Weight: 

BTU (input):

Efficiency:

CFM:

Tank Capacity:

Fuel Use:

Run Time:

Power:

948 lbs

750,000

92.3%

9,417

N/A

5.33 gal/h

N/A

240 V / 1 ph / 60 Hz

TITAN 750 Gas

Weight: 

BTU (input):

Efficiency:

CFM:

Tank Capacity:

Fuel Use:

Run Time:

Power:

948 lbs

750,000

89.8%

9,417

N/A

“721 cfh NG / 291 cfh LPG”

N/A

240 V / 1 ph / 60 Hz

The TITAN Series Indirect Fired Mobile Heater is capable of running on Kerosene, Diesel, Natural Gas and Propane.

TITAN Series Indirect Fired Mobile Heater - Flexible Air Duct

Cantherm Distributors Titan Series Indirect Fired Portable Heater Accessories

Cantherm Distributors supplies a wide variety of heater accessories for your Arcotherm Portable Heater. We have several fuel options, ducting, adapters and thermostats designed to fit your commercial grade portable heater.

ARCO-TITAN1000 Series Heater Additional Specifications:

  • Exceptional value high quality commercial grade portable indirect fired heaters to keep you working regardless of weather
  • TITAN 750 and 1000 available with either natural gas and propane burner or diesel kerosene jet fuel oil burner
  • Options include gas cap with gauge
  • Pre-heated oil filter
  • No supervision required
  • Can be controlled by thermostat humidistat or timer
  • Overheat safety shutoff
  • 4 pass heat exchanger technology
  • Fuel efficient combustion chamber
  • 90% 92% 93% heating efficiency rating
  • Flat free caster wheels
  • Heavy duty frame with lifting points
  • Forklift pockets
  • Chimney support and holder kits
  • Side bumper kit
  • External fuel tank kits
  • Durable and reliable yet light weight
  • 1-way 2-way 3-way custom designed adapters for running ducts hoses in one two or three directions
  • Return inlet adapters for recycling hot air
  • Long carrying handles available
  • Single fuel line kit for recirculating warm fuel for easy starts in cold weather
  • Heat and vent mode
  • Ventilation only mode
  • Automatic cool down cycle
  • CSA Approved