The Arcotherm EK Series is a group of portable forced-air electric heaters available in four different sizes which offer a nominal range of heating power from 5,000 to 60,000 BTU’s. The heating process is 100% clean, eliminating the elements of flame and noxious fumes, as well as 100% efficient, transforming all of the electrical input power into heat output. For these reasons, they are suitable for use in all spaces, even closed rooms. At the same time, they have limited power and are generally used for indoor heating applications and in smaller outdoor structures, and where low-cost electrical power is available. All heaters in the series are made from steel and given a powder coated finish to provide you with a durable unit. Additionally, each unit is equipped with overheat protection, and stays cool even while the heater is running. The two larger units can also be outfitted with ducts to direct the produced heat to a specific room or area.
Code:
Supply Voltage:
Phases:
Frequency:
Max Power:
Max Power:
Max Power:
Min Power:
Min Power:
Temp rise at 68°F (max/min):
Airflow
Room Thermostat setting temp:
Plugs:
Power Cord:
06EK701
120
1
60 Hz
1.5 Kw
5,115 BTU/h
12.5 A
0.75 Kw
2, 558 BTU/h
80/58 °F
200 CFM
32 ÷ 104
Nema 5-15P
12 AWG
Code:
Supply Voltage:
Phases:
Frequency:
Max Power:
Max Power:
Max Power:
Min Power:
Min Power:
Temp rise at 68°F (max/min):
Airflow
Room Thermostat setting temp:
Plugs:
Power Cord:
06EK702
240
1
60 Hz
3 Kw
10,230 BTU/h
12.5 A
1.5 Kw
5,115 BTU/h
80/58 °F
265 CFM
32 ÷ 104
Nema 6-15P
12 AWG
Code:
Supply Voltage:
Phases:
Frequency:
Max Power:
Max Power:
Max Power:
Min Power:
Min Power:
Temp rise at 68°F (max/min):
Airflow
Room Thermostat setting temp:
Plugs:
Power Cord:
06EK703
240
1
60 Hz
10 Kw
34,100 BTU/h
42 A
– Kw
– BTU/h
100 °F
1,200 CFM
32 ÷ 104
–
8 AWG
Code:
Supply Voltage:
Phases:
Frequency:
Max Power:
Max Power:
Max Power:
Min Power:
Min Power:
Temp rise at 68°F (max/min):
Airflow
Room Thermostat setting temp:
Plugs:
Power Cord:
06EK704
240
3
60 Hz
18 Kw
61,380 BTU/h
47 A
12 Kw
40,290 BTU/h
117/81 °F
1,500 CFM
32 ÷ 104
–
8 AWG
Cantherm Distributors supplies a wide variety of heater accessories for your Arcotherm Portable Heater. We have several heating options, ducting, adapters and thermostats designed to fit your commercial grade portable heater.
TK0060-1114
TK0035-1112
TR1415-0001
SK1212-0010 or SK1212-0009
Cantherm Distributors in Winnipeg supplies portable heaters and generators for temporary and emergency heating and power, indoors or outdoors without the need of installation.
Copyright © 2022 Website Design by Dynamite Design