The Arcotherm EC Series is a group of portable indirect-fired heaters available in three different sizes which offer a nominal range of heating power from 100,000 to 300,000 BTU’s. Indirect-fired heaters produce heat by creating a flame in an enclosed combustion chamber. The exhaust created in the combustion process then makes its way through a four-pass heat exchanger and finally expelled through a chimney located at the top of the heater. A custom exhaust vent can be attached to fit any application in order to safely expel the exhaust fumes when used in indoor applications. A powerful fan located at the back of the heater forces ambient room or atmospheric air through the unit, over and around the hot combustion chamber, and expels the freshly heated air out of the front of the unit. This expelled hot air can either blow freely or be ducted in one, two, or three directions to specific areas. The EC Series heaters are used indoors and outdoors in many different industries including, but not limited to, agriculture, aviation, construction, mining, and rental.
Weight:
BTU (input):
Efficiency:
CFM:
Tank Capacity:
Fuel Use:
Run Time:
Power:
275 lbs
293,982
88%
2,530
27.7 gal
2.17 gal/h
13 h
120 V / 1 ph / 60 Hz
Weight:
BTU (input):
Efficiency:
CFM:
Tank Capacity:
Fuel Use:
Run Time:
Power:
207 lbs
204,873
89.5%
1,530
17.2 gal
1.48 gal/h
12 h
120 V / 1 ph / 60 Hz
Weight:
BTU (input):
Efficiency:
CFM:
Tank Capacity:
Fuel Use:
Run Time:
Power:
120 lbs
112,141
84.5%
1,020
11 gal
0.81 gal/h
14 h
120 V / 1 ph / 60 Hz
Cantherm Distributors supplies a wide variety of heater accessories for your Arcotherm Portable Heater. We have several fuel options, ducting, adapters and thermostats designed to fit your commercial grade portable heater.
Cantherm Distributors in Winnipeg supplies portable heaters and generators for temporary and emergency heating and power, indoors or outdoors without the need of installation.
Copyright © 2022 Website Design by Dynamite Design
